WBo2 2E0 Engineering Changes/Fixes

| Buy | WBo2 |   2E0 Engineering Fixes   | 2E0

Rev-1 onward

These engineering change notes may apply to any 2E0 units.

Note: this page requires javascript to be turned ON.

The PCB Rev number is found at the top left of the main board.

Rev 1 and 2 boards differ insignificantly (board dimensions changed, and some holes enlarged for a better fit). R413 has been moved from the end of U8 near the LED PCB's connector, to near the end of U1.


There are currently no fixes required for 2E0.




Page updated 17 August 2005
Statistics by   www.digits.com

Page created 01 August 2005 | Tell me about broken links

| WBo2 | Contact | Feedback | Copyright © Tech Edge